Erregulagarria den Seat Seal Gate balbulak

1. SarreraErregulagarria den Seat Seal Gate balbulak

Erregulagarria den Seat Seal Gate balbulak are also called lifting stem gate valves, also called rising stem gate valves. Usually there is a trapezoidal thread on the lifting rod, through the nut on the top of the valve and the guide groove on the valve body, the rotary motion is changed into linear motion, that is, the operating torque is changed into operating thrust. The opening and closing part of Erregulagarria den Seat Seal Gate balbulak is a gate. The movement direction of the gate is perpendicular to the direction of the fluid. It can only be fully opened and closed, but cannot be adjusted or throttled. The Erregulagarria den Seat Seal Gate balbulak produced by Milestone Valve Company have stable performance and are used in various fields such as petroleum, chemical industry, and water conservancy.

2. parametro teknikoakErregulagarria den Seat Seal Gate balbulak

3.Key points of operation of Erregulagarria den Seat Seal Gate balbulak:

1) The opening and closing direction of Erregulagarria den Seat Seal Gate balbulak should always be closed clockwise.
2. Pneumatic valves in the Erregulagarria den Seat Seal Gate balbulak pipe network are often opened and closed manually, and the number of opening and closing revolutions should not be too much, that is, large-diameter valves should also be within 200-600 revolutions.
3) Erregulagarria den Seat Seal Gate balbulak In order to facilitate the opening and closing operation of one person, the larger opening and closing torque should be 240N-m under the pressure of the pipeline.
4) The opening and closing end of Erregulagarria den Seat Seal Gate balbulak should be a square tenon, with standardized dimensions, and face the ground so that people can directly operate it from the ground. Valves with roulette are not suitable for underground pipe networks.

4. Ontziratzea eta entrega

5. Ohiko galderak

1. Ba al dezaket laginaren eskaera balbularako?
A: Bai, kalitatea probatzeko eta egiaztatzeko laginaren agindua onartzen dugu. Lagin mistoa onartzen da.
2. Ba al duzu MOQ mugarik balbula ordenatzeko?
A: MOQ baxua, laginak egiaztatzeko PC 1 dago eskuragarri.
3. OEM zerbitzua eskain al dezakezu?
A: Bai, OEM-ak daude erabilgarri.
4. Zer moduz ordainketa?
A: Normalean% 30eko gordailua onartzen dugu, eta saldoa bidali aurretik ordainduko da. L7C ondo dago
5. Zure tximeleta-balbulak entregatzeko denbora irauten du?
E: Tamaina gehienetarako, DN50-DN600, balbula piezak ditugu, 1-3 astetan entregatu daiteke, Tianjin itsas portu hurbilenera.
6. Zure produktuen bermea al du?
A: Normalean 12 hilabeteko bermea eskaintzen dugu zerbitzuan edo bidalketa-datatik 18 hilabete.
7. Zein da zure produktuen estandarizazioa?
A: GB / T12238-2008, JBfT 8527-1997, API 609, EN 593-1998, DIN 85003-3-1997

6. Harremanetarako informazioa